News Center
The news is updated in real time, and the latest developments are displayed here.
News Center
Endeavour Brand Promotional Film
Endeavour Brand Promotional Film
16
2019
/
08
Anyi Yingchuang Planning Film
16
2019
/
08
Glass door and window sealing strip, should pay attention to these six points before installation
In order to install the window tightly and avoid air leakage and water seepage, the window sealing strip is usually installed, which can be dustproof, waterproof, soundproof and sealed, and has good performance assistance for both hollow glass and tempered glass. However, many people are not very understanding of it, especially in the installation of this piece, the following is to introduce the window sealing strip installation method and precautions.
15
2019
/
08
The larger the 1. form, the less energy-efficient it is. The large area of window heat dissipation is glass, not window frames. Glass accounts for 70% to 90% of the area of different types of windows. The window types commonly used in buildings are generally sliding windows, casement windows and fixed windows. The structure of the sliding window determines that it is not an ideal energy-saving window. Structurally, casement windows have obvious advantages over sliding windows.
14
2019
/
08
Door and window seals, hardware accessories, construction, industrial silicone sealant production
Jiangxi Fenfa Technology Co., Ltd. is located at No. 18 Fenfa Road, Anyi Industrial Park, Nanchang City. It covers an area of 180 acres and has a modern standard factory building of 80000 square meters. It has developed into a R & D and production center for building silicone sealants, sealant strips, and door and window hardware accessories. It is a "one-stop" supplier of doors, windows and curtain wall accessories.
08
2019
/
08
These easily overlooked details of doors and windows, glass is the most important
As we all know, the final quality of doors and windows has a relatively large relationship with the processing capacity of the processing plant, and one of the important indicators is the angle. The connection of two profiles at the corner of a good door and window is made by using aluminum angle code, then the profile and the angle code are extruded together by an angle machine, and then two-component glue is injected into the hole to cure the angle code frame material together. The commonly used low-quality methods are: no corner code splicing, no curing glue for corner code, or a little bit on the mouth to deceive consumers. In addition, the quality can also be judged by touching the stitching of the group corners by hand. The smoother the group corners, the better the processing quality. Look at the adhesive tape to ensure that the doors and windows
07
2019
/
08
Contact Us
Telephone:0791-83417333
After sales:400-8123-763
Fax: 0791-83427620
Address: Anyi Industrial Park, Anyi County, Nanchang City, Jiangxi Province
All rights reserved©Jiangxi Fenfa Viscose Chemical Co., Ltd.
Website Construction: Power of Chinese Enterprises NanchangThis site already supports IPV6